FM POWER AND COMMUNICATIONS PTY LTD — Electrical in Perth

Electricians typically charge $70–$130 per hour depending on the state and job type. After-hours and emergency callouts attract higher rates, often $150–$250/hr plus a callout fee of $80–$150.

Yes — in Australia, all electrical work including new power points, light fittings, safety switches, and switchboard upgrades must be performed by a licensed electrician. The only DIY exception is replacing light globes.

A safety switch (RCD) shuts off power within milliseconds if it detects a fault, protecting against electric shock. Australian standards require safety switches on all power and lighting circuits. If your home doesn't have them, upgrading is a legal requirement when renovating.

Most switchboard upgrades take about half a day (4–6 hours), with power off for 2–4 hours while the electrician swaps the board and tests each circuit. Allow a full day if new wiring runs are needed. Your electrician will also notify your distributor (e.g., Ausgrid, Jemena, Citipower).

A Certificate of Electrical Safety (CES) must describe the work performed, the licence number of the electrician, the address, and confirm the installation was tested and complies with AS/NZS 3000.