Plaster Crack Repair in Rochedale, Brisbane
Compare plaster crack repair specialists in Rochedale using ABN, profile, public review, and referral signals where available. Typical plastering rates in QLD range from $45–$90/hr.
1 Checked Plaster Crack Repair Specialists in Rochedale
How Much Does Plaster Crack Repair Cost in Rochedale?
The following cost estimates are based on industry averages for plastering work in QLD. Actual prices will vary based on the scope of work, materials required, and access. Always get 2–3 written quotes before proceeding.
Typical Range
$45–$90
/hr
Emergency Rate
$135
After-hours / urgent
Free Quotes
2–3
Always get multiple
Price estimates only. Confirm scope, timing, and final cost with your chosen tradie before work begins.
Ready for exact prices? Get 2–3 free quotes for plaster crack repair.
Get Free QuotesMaterials You'll Need for Plaster Crack Repair
What a tradie typically uses for plaster crack repair, with current retail price ranges. Your tradie usually supplies these — the quote should itemise them.
- Plasterboard topping compound · 20kgx1$34.19–$73.34
- Plasterboard jointing tape · roll$6.28–$20.45
Rough materials total
$40.47–$93.79
Core items only — labour is on top (see cost guide above)
Price ranges sampled from major Australian hardware retailers (July 2026). Estimates only — quantities and final costs depend on your job. Always confirm inclusions in writing with your tradie.
Plastering Licensing Requirements in QLD
In Queensland, plastering work over $3,300 requires a QBCC licence under the Plastering trade category.
Other Plastering Services in Rochedale
Also looking for related plastering work in Rochedale?
Frequently Asked Questions About Plaster Crack Repair in Rochedale
How much does it cost to repair a cracked plaster wall in Australia?
Repairing a cracked plaster wall in Australia costs $45–$90 per hour for a licensed plasterer, with a small hairline crack often a one to two hour job. Materials are cheap: jointing compound runs about $63 per 20kg tub and jointing tape about $8.50 a roll, so most of the cost is labour and access.
Are hairline cracks in plaster walls normal in Australia?
Yes, small hairline cracks along plasterboard joints or near door frames are common as a house settles and timber frames expand and contract with the seasons, and they're usually cosmetic. Wider cracks, ones that keep reopening, or cracks running diagonally from a window corner are worth a closer look. Repair materials cost about $63 for compound and $8.50 for tape.
Can you paint over a plaster crack repair straight away?
No, freshly applied jointing compound needs to fully dry first, typically 24 hours or more per coat depending on thickness and humidity, then a light sand and a coat of sealer or primer before topcoat paint. Painting over damp compound traps moisture and shows through as a flat patch. Compound costs about $63 per 20kg tub.
How much does gyprock repair cost in Australia?
Small hole repairs typically cost $80–$200. Repairing a large section of wall or ceiling ranges from $300–$800. Full room replastering can cost $1,500–$4,000+ depending on size and condition.
Do I need a licensed plasterer?
In most Australian states, plastering work over a certain threshold (e.g., $10,000 in Victoria) requires a registered building practitioner. For smaller jobs, using a licensed plasterer is still strongly recommended for quality and warranty reasons.
How long does gyprock repair take to dry before painting?
Plaster compound typically needs 24–48 hours to dry fully between coats, and a minimum 48–72 hours before painting. In humid conditions (common in coastal areas), allow extra drying time.
What's the difference between cornice cement and plaster?
Cornice cement is a pre-mixed adhesive/filler specifically for attaching and patching cornice. Plaster is the base compound for walls and ceilings. Each product has different drying times and finishing properties — using the wrong one is a common DIY mistake.
Can I plaster over existing tiles?
It's possible but not always recommended. A plasterer needs to ensure the tiles are soundly bonded, properly prepared with bonding agent, and the weight load is appropriate. Direct plastering over tiles is common for fire-rated walls.