Concrete Driveway Installation in Narre Warren, Dandenong
Compare concrete driveway installation specialists in Narre Warren using ABN, profile, public review, and referral signals where available. Typical concreting rates in VIC range from $50–$150/m².
4 Checked Concrete Driveway Installation Specialists in Narre Warren
Evergold concrete &landscape
Narre Warren, Dandenong
Brennt Concreting
Narre Warren, Dandenong
Narre Warren Concrete Supplies
Narre Warren, Dandenong
Cornell Concrete Constructions
Narre Warren, Dandenong
How Much Does Concrete Driveway Installation Cost in Narre Warren?
The following cost estimates are based on industry averages for concreting work in VIC. Actual prices will vary based on the scope of work, materials required, and access. Always get 2–3 written quotes before proceeding.
Typical Range
$50–$150
/m²
Emergency Rate
$225
After-hours / urgent
Free Quotes
2–3
Always get multiple
Price estimates only. Confirm scope, timing, and final cost with your chosen tradie before work begins.
Ready for exact prices? Get 2–3 free quotes for concrete driveway installation.
Get Free QuotesMaterials You'll Need for Concrete Driveway Installation
What a tradie typically uses for concrete driveway installation, with current retail price ranges. Your tradie usually supplies these — the quote should itemise them.
- SL72 reinforcing mesh sheet · 6x2.4m sheetper 14m²$20.83–$50.73
- Formply sheet 17mm · sheetedge forms$25.93–$54.48
- Concrete sealer 4L · 4Lfinish$89–$172
Rough materials total
$136–$277
Core items only — labour is on top (see cost guide above)
Price ranges sampled from major Australian hardware retailers (July 2026). Estimates only — quantities and final costs depend on your job. Always confirm inclusions in writing with your tradie.
Concreting Licensing Requirements in VIC
In Victoria, concreting work over $10,000 requires a registered building practitioner. Structural slabs and footings require engineering sign-off and building permit.
Other Concreting Services in Narre Warren
Also looking for related concreting work in Narre Warren?
Frequently Asked Questions About Concrete Driveway Installation in Narre Warren
How much does a concrete driveway cost in Australia?
Plain concrete driveways cost $65–$110 per square metre installed in Australia; exposed aggregate runs $100–$150 and coloured or stamped finishes sit between. A typical double driveway (35–45m²) lands at $2,500–$6,000 including excavation and mesh.
How much will 20kg of concrete cover?
A 20kg bag of concrete mix ($9–$14 at retail) yields about 10 litres. Enough for 0.1 of a square metre at 100mm slab thickness. That is why driveways use premixed truck concrete: a single cubic metre replaces roughly 100 bags.
What is the 4 2 1 rule for concrete?
It is the classic site mix ratio: four parts gravel, two parts sand, one part cement. For structural work like driveways, though, Australian contractors order batched N25–N32 concrete from a plant, because backyard mixing cannot guarantee consistent strength across a slab.
How thick should a concrete slab be for a driveway?
Residential driveways should be a minimum 100mm (4 inches) thick with SL72 or SL82 mesh reinforcement. For areas with heavy vehicles or truck access, 125–150mm with rebar reinforcement is recommended. Thicker slabs are needed for reactive soils.
How long does concrete take to cure?
Concrete reaches about 70% strength in 7 days and full strength at 28 days. Light foot traffic can resume after 24–48 hours. Vehicles should wait at least 7 days. In cold weather, curing slows significantly — your concretor may use curing compounds or covers.
What is exposed aggregate concrete?
Exposed aggregate concrete has the top layer of cement paste removed (by washing) to reveal the stones within the mix. It's popular for driveways, paths, and pool surrounds as it provides a decorative finish with natural slip resistance. It costs 15–25% more than plain concrete.
Why does concrete crack?
All concrete eventually cracks due to shrinkage, thermal movement, or ground movement. Control joints are deliberately placed every 3–4 metres to direct cracking. Cracks wider than 3mm or that are heaving or sinking indicate a structural issue requiring assessment.
What is the difference between concrete and cement?
Cement is an ingredient in concrete. Concrete is the final product made by mixing cement, sand, aggregate (gravel), and water. Portland cement is the most common binder. Ready-mix concrete (delivered by truck) is specified by strength grade — residential driveways typically use N20 or N25.