Coloured Concrete in Burwood, Melbourne
Compare coloured concrete specialists in Burwood using ABN, profile, public review, and referral signals where available. Typical concreting rates in VIC range from $50–$150/m².
Coloured Concrete Specialists Serving Burwood
No listings yet in Burwood
No specialists listed in Burwood yet. Get quotes from concreting businesses across Melbourne instead.
How Much Does Coloured Concrete Cost in Burwood?
The following cost estimates are based on industry averages for concreting work in VIC. Actual prices will vary based on the scope of work, materials required, and access. Always get 2–3 written quotes before proceeding.
Typical Range
$50–$150
/m²
Emergency Rate
$225
After-hours / urgent
Free Quotes
2–3
Always get multiple
Price estimates only. Confirm scope, timing, and final cost with your chosen tradie before work begins.
Ready for exact prices? Get 2–3 free quotes for coloured concrete.
Get Free QuotesMaterials You'll Need for Coloured Concrete
What a tradie typically uses for coloured concrete, with current retail price ranges. Your tradie usually supplies these — the quote should itemise them.
- Concrete oxide pigment · eachper batch$18.65–$29.54
- Concrete sealer 4L · 4L$89–$172
Rough materials total
$108–$202
Core items only — labour is on top (see cost guide above)
Price ranges sampled from major Australian hardware retailers (July 2026). Estimates only — quantities and final costs depend on your job. Always confirm inclusions in writing with your tradie.
Concreting Licensing Requirements in VIC
In Victoria, concreting work over $10,000 requires a registered building practitioner. Structural slabs and footings require engineering sign-off and building permit.
Other Concreting Services in Burwood
Also looking for related concreting work in Burwood?
Frequently Asked Questions About Coloured Concrete in Burwood
How much does coloured concrete cost in Australia?
Coloured concrete costs $50 to $150 per square metre installed in Australia, typically $10 to $20 more than plain concrete because of oxide pigment and sealing. Oxide pigment costs $19 to $30 per pack, and a quality sealer to protect the colour runs $89 to $172 for a 4 litre tin.
How is concrete coloured?
Concrete is coloured by mixing oxide pigment powder into the wet mix before pouring, or by applying a dry-shake hardener across the surface for deeper, more even colour. Once cured, a sealer is applied to protect the pigment from UV fading, staining and efflorescence over time.
Does coloured concrete fade over time?
Coloured concrete can fade with UV exposure and heavy foot traffic, but a quality sealer slows this considerably and is usually reapplied every two to three years. Darker oxide colours tend to show fading and efflorescence more noticeably than lighter, natural tones, so regular resealing keeps the finish looking fresh.
How much does a concrete driveway cost in Australia?
A standard concrete driveway costs $65–$150/m² depending on thickness, reinforcement, finish, and location. A double driveway of ~50m² typically costs $3,500–$7,500. Exposed aggregate and decorative finishes cost more than plain broom-finished concrete.
How thick should a concrete slab be for a driveway?
Residential driveways should be a minimum 100mm (4 inches) thick with SL72 or SL82 mesh reinforcement. For areas with heavy vehicles or truck access, 125–150mm with rebar reinforcement is recommended. Thicker slabs are needed for reactive soils.
How long does concrete take to cure?
Concrete reaches about 70% strength in 7 days and full strength at 28 days. Light foot traffic can resume after 24–48 hours. Vehicles should wait at least 7 days. In cold weather, curing slows significantly — your concretor may use curing compounds or covers.
What is exposed aggregate concrete?
Exposed aggregate concrete has the top layer of cement paste removed (by washing) to reveal the stones within the mix. It's popular for driveways, paths, and pool surrounds as it provides a decorative finish with natural slip resistance. It costs 15–25% more than plain concrete.
Why does concrete crack?
All concrete eventually cracks due to shrinkage, thermal movement, or ground movement. Control joints are deliberately placed every 3–4 metres to direct cracking. Cracks wider than 3mm or that are heaving or sinking indicate a structural issue requiring assessment.