Concrete Repair And Crack Filling in Doncaster East, Melbourne
Compare concrete repair and crack filling specialists in Doncaster East using ABN, profile, public review, and referral signals where available. Typical concreting rates in VIC range from $50–$150/m².
1 Checked Concrete Repair And Crack Filling Specialists in Doncaster East
How Much Does Concrete Repair And Crack Filling Cost in Doncaster East?
The following cost estimates are based on industry averages for concreting work in VIC. Actual prices will vary based on the scope of work, materials required, and access. Always get 2–3 written quotes before proceeding.
Typical Range
$50–$150
/m²
Emergency Rate
$225
After-hours / urgent
Free Quotes
2–3
Always get multiple
Price estimates only. Confirm scope, timing, and final cost with your chosen tradie before work begins.
Ready for exact prices? Get 2–3 free quotes for concrete repair and crack filling.
Get Free QuotesMaterials You'll Need for Concrete Repair And Crack Filling
What a tradie typically uses for concrete repair and crack filling, with current retail price ranges. Your tradie usually supplies these — the quote should itemise them.
- GP cement 20kg · 20kg bagx1$9.32–$57.33
- Concrete sealer 4L · 4LIf needed$89–$172
Price ranges sampled from major Australian hardware retailers (July 2026). Estimates only — quantities and final costs depend on your job. Always confirm inclusions in writing with your tradie.
Concreting Licensing Requirements in VIC
In Victoria, concreting work over $10,000 requires a registered building practitioner. Structural slabs and footings require engineering sign-off and building permit.
Other Concreting Services in Doncaster East
Also looking for related concreting work in Doncaster East?
Frequently Asked Questions About Concrete Repair And Crack Filling in Doncaster East
How much does concrete crack repair cost in Australia?
Concrete crack repair and patching typically costs $50 to $150 per square metre in Australia, depending on crack severity and surface prep. Small hairline cracks can sometimes be filled for the price of a bag of cement mix, from about $9 to $57, while wider structural cracks need a tradesperson.
What causes concrete to crack?
Concrete cracks mainly from ground movement, shrinkage as it cures, tree root intrusion, poor drainage saturating the base, or inadequate reinforcing when it was originally poured. Reactive clay soils common across Australia make this worse, which is why cracks often reappear near driveways, paths and slab edges over time.
Can I fill a concrete crack myself?
Minor hairline cracks can be filled with a cement-based patching compound or crack filler from a hardware store, but wider or spreading cracks usually signal movement in the base and need a tradesperson to assess before repair. Sealing a crack without fixing the underlying cause often means it returns.
How much does a concrete driveway cost in Australia?
A standard concrete driveway costs $65–$150/m² depending on thickness, reinforcement, finish, and location. A double driveway of ~50m² typically costs $3,500–$7,500. Exposed aggregate and decorative finishes cost more than plain broom-finished concrete.
How thick should a concrete slab be for a driveway?
Residential driveways should be a minimum 100mm (4 inches) thick with SL72 or SL82 mesh reinforcement. For areas with heavy vehicles or truck access, 125–150mm with rebar reinforcement is recommended. Thicker slabs are needed for reactive soils.
How long does concrete take to cure?
Concrete reaches about 70% strength in 7 days and full strength at 28 days. Light foot traffic can resume after 24–48 hours. Vehicles should wait at least 7 days. In cold weather, curing slows significantly — your concretor may use curing compounds or covers.
What is exposed aggregate concrete?
Exposed aggregate concrete has the top layer of cement paste removed (by washing) to reveal the stones within the mix. It's popular for driveways, paths, and pool surrounds as it provides a decorative finish with natural slip resistance. It costs 15–25% more than plain concrete.
Why does concrete crack?
All concrete eventually cracks due to shrinkage, thermal movement, or ground movement. Control joints are deliberately placed every 3–4 metres to direct cracking. Cracks wider than 3mm or that are heaving or sinking indicate a structural issue requiring assessment.