Concrete Path Installation in Myaree, Perth
Compare concrete path installation specialists in Myaree using ABN, profile, public review, and referral signals where available. Typical concreting rates in WA range from $50–$150/m².
Concrete Path Installation Specialists Serving Myaree
No listings yet in Myaree
No specialists listed in Myaree yet. Get quotes from concreting businesses across Perth instead.
How Much Does Concrete Path Installation Cost in Myaree?
The following cost estimates are based on industry averages for concreting work in WA. Actual prices will vary based on the scope of work, materials required, and access. Always get 2–3 written quotes before proceeding.
Typical Range
$50–$150
/m²
Emergency Rate
$225
After-hours / urgent
Free Quotes
2–3
Always get multiple
Price estimates only. Confirm scope, timing, and final cost with your chosen tradie before work begins.
Ready for exact prices? Get 2–3 free quotes for concrete path installation.
Get Free QuotesMaterials You'll Need for Concrete Path Installation
What a tradie typically uses for concrete path installation, with current retail price ranges. Your tradie usually supplies these — the quote should itemise them.
- Concrete mix 20kg · 20kg bag~10 bags per m² at 100mm$8.89–$36.80
- SL72 reinforcing mesh sheet · 6x2.4m sheet$20.83–$50.73
- Formply sheet 17mm · sheet$25.93–$54.48
Rough materials total
$55.65–$142
Core items only — labour is on top (see cost guide above)
Price ranges sampled from major Australian hardware retailers (July 2026). Estimates only — quantities and final costs depend on your job. Always confirm inclusions in writing with your tradie.
Concreting Licensing Requirements in WA
In WA, concreting for structural purposes requires a building services registration. Decorative and non-structural concreting is largely unregulated.
Other Concreting Services in Myaree
Also looking for related concreting work in Myaree?
Frequently Asked Questions About Concrete Path Installation in Myaree
How much does a concrete path cost in Australia?
A concrete path in Australia typically costs $50–$150 per square metre installed, covering formwork, reinforcing mesh, concrete mix and labour. A basic 20kg bag of concrete mix costs $9–$37 for small patch jobs, but paths are usually poured from bulk mixed truck concrete for consistency and strength.
Is concrete the same as cement?
Concrete and cement are not the same thing. Cement is a fine powder binder, usually Portland cement, that is mixed with water, sand and aggregate to make concrete. Concrete is the finished, hardened material used for paths, slabs and driveways. Cement alone is never used to pour a path.
How much will 20kg of concrete cover?
A 20kg bag of pre-mixed concrete covers roughly 0.01 cubic metres once mixed, enough for a small patch or post hole rather than a full path. For a standard 100mm thick concrete path, expect to need about one 20kg bag per 0.1 square metre, so bulk or truck-mixed concrete suits larger jobs.
How much does a concrete driveway cost in Australia?
A standard concrete driveway costs $65–$150/m² depending on thickness, reinforcement, finish, and location. A double driveway of ~50m² typically costs $3,500–$7,500. Exposed aggregate and decorative finishes cost more than plain broom-finished concrete.
How thick should a concrete slab be for a driveway?
Residential driveways should be a minimum 100mm (4 inches) thick with SL72 or SL82 mesh reinforcement. For areas with heavy vehicles or truck access, 125–150mm with rebar reinforcement is recommended. Thicker slabs are needed for reactive soils.
How long does concrete take to cure?
Concrete reaches about 70% strength in 7 days and full strength at 28 days. Light foot traffic can resume after 24–48 hours. Vehicles should wait at least 7 days. In cold weather, curing slows significantly — your concretor may use curing compounds or covers.
What is exposed aggregate concrete?
Exposed aggregate concrete has the top layer of cement paste removed (by washing) to reveal the stones within the mix. It's popular for driveways, paths, and pool surrounds as it provides a decorative finish with natural slip resistance. It costs 15–25% more than plain concrete.
Why does concrete crack?
All concrete eventually cracks due to shrinkage, thermal movement, or ground movement. Control joints are deliberately placed every 3–4 metres to direct cracking. Cracks wider than 3mm or that are heaving or sinking indicate a structural issue requiring assessment.