Boundary Fence Replacement in Scarborough, Perth
Compare boundary fence replacement specialists in Scarborough using ABN, profile, public review, and referral signals where available. Typical fencing rates in WA range from $100–$180/m.
1 Checked Boundary Fence Replacement Specialists in Scarborough
How Much Does Boundary Fence Replacement Cost in Scarborough?
The following cost estimates are based on industry averages for fencing work in WA. Actual prices will vary based on the scope of work, materials required, and access. Always get 2–3 written quotes before proceeding.
Typical Range
$100–$180
/m
Emergency Rate
$270
After-hours / urgent
Free Quotes
2–3
Always get multiple
Price estimates only. Confirm scope, timing, and final cost with your chosen tradie before work begins.
Ready for exact prices? Get 2–3 free quotes for boundary fence replacement.
Get Free QuotesMaterials You'll Need for Boundary Fence Replacement
What a tradie typically uses for boundary fence replacement, with current retail price ranges. Your tradie usually supplies these — the quote should itemise them.
- Treated pine fence paling · each~13/m$1.68–$3.56
- Treated pine fence post 125x75 · eachevery 2.4m$24.31–$68.14
- Treated pine fence rail · per lm$10.47–$27.17
- Concrete mix 20kg · 20kg bag$8.89–$36.80
Rough materials total
$45.35–$136
Core items only — labour is on top (see cost guide above)
Price ranges sampled from major Australian hardware retailers (July 2026). Estimates only — quantities and final costs depend on your job. Always confirm inclusions in writing with your tradie.
Fencing Licensing Requirements in WA
In WA, the Dividing Fences Act 1961 applies. Fencing contractors are not separately licensed but building services registration applies for structural fencing.
Other Fencing Services in Scarborough
Also looking for related fencing work in Scarborough?
Frequently Asked Questions About Boundary Fence Replacement in Scarborough
How much does it cost to replace a boundary fence in Australia?
Replacing a boundary fence in Australia typically costs $100–$180 per metre supplied and installed, depending on fence height, timber grade and ground conditions. A standard timber paling fence uses palings priced around $1.68–$3.56 each plus posts and rails, so a 20 metre boundary commonly lands between $2,000 and $3,600.
Do neighbours have to split the cost of a boundary fence in Australia?
In most Australian states, neighbours share the cost of a standard dividing fence equally under local fencing legislation, since it serves both properties. If you want a taller, more expensive or decorative fence than the standard, you typically pay the difference yourself, and getting agreement in writing before work starts avoids disputes later.
How long does a timber boundary fence last in Australia?
A treated pine boundary fence typically lasts 15–20 years in Australian conditions before palings need replacing, though harsh sun, termites and coastal salt air can shorten that lifespan. Regular checks for rot at the base of posts and prompt repair of loose palings help a boundary fence reach its full service life.
Who is responsible for paying for a boundary fence?
Under Australian fencing legislation, the cost of a standard dividing fence is shared equally between neighbours. You must give your neighbour a Fencing Notice before starting work. If they don't respond within 30 days, you can proceed and recover half the cost through VCAT, NCAT, or equivalent tribunal.
Do I need council approval for a fence?
Fences up to 2m high generally don't require council approval in residential areas. Fences in front yards typically have lower height limits (1.2–1.5m). Fences in heritage overlays, bushfire zones, or near intersections may require a planning permit. Check your council's requirements.
What is the best fencing material for Australia?
Colorbond steel is the most popular choice — durable, low maintenance, and available in 22 colours. Hardwood timber is attractive but requires regular oiling/painting. Aluminium is lightweight and rust-proof. For pools, toughened glass provides unobstructed views. Choose material based on privacy needs, budget, and maintenance preference.
What height is a standard pool fence in Australia?
Pool fences must be a minimum 1,200mm high with no climbable elements. Non-climbable zones of 900mm must be maintained on either side. Gates must be self-closing and self-latching. These are national minimum standards — your state or council may have stricter requirements.
Can I build a fence on the boundary line?
Yes, dividing fences are built on the boundary line. Your fence must not encroach on your neighbour's property. If the fence is inward of the boundary, it's entirely your responsibility to maintain. A surveyor can confirm the exact boundary if there's any dispute.