How Much Does bobcat hire Cost in Australia?
bobcat hire costs vary significantly across Australia depending on your state, the complexity of the work, and local market conditions. Typical excavation rates range from $90–$180/hr nationally. Use this guide to understand what to expect, how to compare quotes, and find verified local specialists near you.
bobcat hire Cost Guide Australia 2026
The following pricing is based on national industry averages. Costs may be 10–20% higher in capital cities (Sydney, Melbourne) and lower in regional areas. Always get 2–3 written quotes before committing to any excavation work.
National Average
$90–$180
/hr
Emergency / After-Hours
$270
Estimated peak rate
Quotes Recommended
2–3
Before any work begins
bobcat hire Availability by State
VIC
76
listed
NSW
62
listed
WA
47
listed
QLD
40
listed
SA
31
listed
TAS
24
listed
NT
18
listed
ACT
13
listed
Prices are estimates only and may change without notice. Verify current pricing directly with your chosen contractor.
Find bobcat hire Specialists Near You
Browse verified excavation by city across Australia:
Excavation Licensing Requirements in Australia
Licensing requirements vary by state. Always verify your contractor holds the correct licence for your location.
Victoria
In Victoria, excavation associated with building work over $10,000 requires a registered building practitioner as principal contractor. Excavation near existing structures requires a structural engineer's assessment. Dial Before You Dig (1100) must be contacted before any excavation.
New South Wales
In NSW, excavation on residential sites where building work exceeds $20,000 requires a contractor licence. Structural excavation requires engineering sign-off. Dial Before You Dig (1100) notification is legally required before all excavation.
Queensland
In Queensland, excavation work over $3,300 as part of a building project requires a QBCC licence. All excavation must comply with Work Health and Safety Act 2011. Dial Before You Dig notification is mandatory under Queensland law.
Western Australia
In WA, excavation for structural purposes requires appropriate building services registration. Dial Before You Dig notification is legally required. WorkSafe WA requires competent supervision of all excavations over 1.5m depth.
South Australia
In SA, structural excavation requires a licensed builder. Dial Before You Dig (1100) is legally required before any excavation under SafeWork SA regulations.
Tasmania
In Tasmania, excavation for structural purposes requires a registered building practitioner under the Building Act 2016. Dial Before You Dig is mandatory before all excavation works.
Australian Capital Territory
In the ACT, excavation requires appropriate building licensing for structural work. Dial Before You Dig is mandatory before any excavation commences under the Utilities Act 2000.
Northern Territory
In the NT, structural excavation requires appropriate NT Build licensing. Dial Before You Dig is essential given buried infrastructure throughout Darwin and major centres.
Related Excavation Services
Also looking for other excavation services in Australia?
bobcat hire: Frequently Asked Questions
How much does excavation cost in Australia?
Machine excavation (bobcat or excavator hire with operator) costs $90–$180/hr. Site cut and fill for a house slab typically costs $5,000–$20,000 depending on volume and soil type. Rock excavation costs significantly more ($200–$400/hr) due to equipment requirements. Always get quotes based on the specific scope.
Do I need to check for underground services before excavating?
Yes — this is legally required. Call Dial Before You Dig (1100 or dial1before.com.au) at least 2 business days before any excavation. They'll provide plans of underground water, gas, electricity, and telecommunications lines. Hitting an underground service can be dangerous and you may be liable for repair costs.
What is cut and fill excavation?
Cut and fill is the process of cutting into a sloped site to create a level building pad, using the excavated material to fill lower areas. It's the most common method for sloped residential blocks. Engineers design the fill compaction requirements and drainage to prevent subsidence.
What equipment is used for residential excavation?
Bobcats (skid-steer loaders) are used for tight access and smaller volumes. Mini-excavators suit confined residential sites. Full-size excavators are used for large volumes, deep trenching, or rock breaking. Tipper trucks remove spoil from site. The right equipment depends on access, volume, and soil type.
How do I dispose of excavated soil in Australia?
Clean fill soil can often be taken to local council-approved fill sites, used on other properties, or advertised free on platforms like Gumtree. Contaminated soil must go to a licensed waste facility. Your excavation contractor usually arranges removal — confirm this is included in the quote.
Do I need a permit to excavate in Australia?
Excavation associated with a building project is covered under the building permit. Excavation near the boundary (within 1.5m or below the angle of repose of your neighbour's footings) may require a structural engineer's report. Excavating near Council infrastructure (roads, footpaths) requires a separate permit.
Find a Excavation Near You
TradeRefer lists verified, ABN-checked excavation across Australia, ranked by real community referrals — not paid placement.
Browse Your Area