How Much Does hardwood decking installation Cost in Australia?
hardwood decking installation costs vary significantly across Australia depending on your state, the complexity of the work, and local market conditions. Typical decking rates range from $200–$1000/m² nationally. Use this guide to understand what to expect, how to compare quotes, and find verified local specialists near you.
hardwood decking installation Cost Guide Australia 2026
The following pricing is based on national industry averages. Costs may be 10–20% higher in capital cities (Sydney, Melbourne) and lower in regional areas. Always get 2–3 written quotes before committing to any decking work.
National Average
$200–$1000
/m²
Emergency / After-Hours
$1500
Estimated peak rate
Quotes Recommended
2–3
Before any work begins
hardwood decking installation Availability by State
VIC
43
listed
NSW
37
listed
QLD
14
listed
SA
12
listed
WA
8
listed
TAS
8
listed
NT
7
listed
ACT
3
listed
Prices are estimates only and may change without notice. Verify current pricing directly with your chosen contractor.
Find hardwood decking installation Specialists Near You
Browse verified decking by city across Australia:
Decking Licensing Requirements in Australia
Licensing requirements vary by state. Always verify your contractor holds the correct licence for your location.
Victoria
In Victoria, decks over 1m above ground level or attached to a dwelling typically require a building permit and a registered building practitioner with the VBA. Timber decks in bushfire-prone areas must use BAL-rated materials compliant with the NCC.
New South Wales
In NSW, decks over certain height or area thresholds require a Development Application and a licensed builder. The NSW Rural Fire Service specifies BAL-rated material requirements for bush fire zones.
Queensland
In Queensland, decks requiring a building development approval must be constructed by a QBCC-licensed builder. Pool safety inspections may be required where decks have access to a pool area.
Western Australia
In WA, decks requiring a building permit (generally over 0.5m high) must be constructed or supervised by a licensed builder. Building permits are issued by the relevant local government.
South Australia
In SA, decks over 0.5m in height or exceeding exempt area thresholds require Development Approval and a licensed builder through Consumer and Business Services.
Tasmania
In Tasmania, decks requiring a building permit must be constructed by a registered building practitioner under the Building Act 2016. Bush fire zone material requirements apply.
Australian Capital Territory
In the ACT, decks over specific area and height thresholds require Building Approval and a licensed builder. Compliant materials must be used in designated bushfire-prone areas.
Northern Territory
In the NT, deck construction in Darwin must comply with Cyclone C/D wind load requirements under the NCC. Building permits apply to elevated or large decking structures. All materials must be suitable for tropical conditions.
Related Decking Services
Also looking for other decking services in Australia?
hardwood decking installation: Frequently Asked Questions
How much does a timber deck cost in Australia?
A basic treated pine deck (20m²) costs $4,000–$8,000 installed. Hardwood decking (Merbau, Spotted Gum) costs $6,000–$15,000 for the same size. Composite decking (Trex, Millboard) costs $8,000–$18,000 — more expensive upfront but lower lifetime maintenance cost. Elevated decks cost significantly more due to structural requirements.
Do I need council approval for a timber deck?
Decks over 1m above ground, attached to the house, or exceeding area thresholds (varies by state and council) require a building permit. In most states, a ground-level deck under 1m high with area under 10–18m² is exempt. Decks in bushfire-prone areas require BAL-rated materials. Always check with your council or building surveyor before starting.
What is the best timber for an outdoor deck in Australia?
Hardwoods: Merbau (durable, affordable, reddish-brown), Spotted Gum (beautiful grain, extremely durable), Blackbutt (light blonde, durable). All are rated Class 1–2 for above-ground durability. Treated pine is budget-friendly but requires regular oiling. Composite decking (timber and recycled plastic) has lowest maintenance but looks less natural.
How often does a timber deck need to be oiled or stained?
Merbau and most hardwood decks need oiling every 12–18 months to maintain appearance and UV protection. Treated pine needs sealing or staining every 12 months. Oil your deck when water no longer beads on the surface. Clean thoroughly before re-oiling. Composite decking requires only cleaning — no oiling needed.
What is composite decking and is it worth the premium?
Composite decking is made from a blend of recycled wood fibre and plastic — it won't rot, splinter, or need oiling. Brands like Trex, Modwood, and Millboard cost $180–$400/m² installed vs $120–$250/m² for hardwood. For families with children (no splinters), pool decks (moisture-resistant), and those who prefer low maintenance, composite is worth the premium.
How long does a deck last in Australia?
Hardwood decks last 25–40+ years with maintenance. Treated pine lasts 15–25 years. Composite decking is warranted for 25–30 years. Substructure (bearers and joists) often needs replacement before the decking boards — especially with treated pine. Inspect substructure annually for softening, particularly in high-rainfall areas.
Find a Decking Near You
TradeRefer lists verified, ABN-checked decking across Australia, ranked by real community referrals — not paid placement.
Browse Your Area