How Much Does welding repairs Cost in Australia?
welding repairs costs vary significantly across Australia depending on your state, the complexity of the work, and local market conditions. Typical welding & fabrication rates range from $80–$150/hr nationally. Use this guide to understand what to expect, how to compare quotes, and find verified local specialists near you.
welding repairs Cost Guide Australia 2026
The following pricing is based on national industry averages. Costs may be 10–20% higher in capital cities (Sydney, Melbourne) and lower in regional areas. Always get 2–3 written quotes before committing to any welding & fabrication work.
National Average
$80–$150
/hr
Emergency / After-Hours
$225
Estimated peak rate
Quotes Recommended
2–3
Before any work begins
welding repairs Availability by State
NSW
89
listed
VIC
81
listed
QLD
71
listed
WA
51
listed
SA
38
listed
TAS
32
listed
NT
18
listed
ACT
12
listed
Prices are estimates only and may change without notice. Verify current pricing directly with your chosen contractor.
Find welding repairs Specialists Near You
Browse verified welding & fabrication by city across Australia:
Welding & Fabrication Licensing Requirements in Australia
Licensing requirements vary by state. Always verify your contractor holds the correct licence for your location.
Victoria
In Victoria, general fabrication welding does not require a specific trade licence. Structural steel welding must comply with AS/NZS 2980. Pressure vessel and boiler work requires compliance with AS 3788 and WorkSafe Victoria certification requirements.
New South Wales
In NSW, general welding does not require a specific trade licence. Structural steel welding requires AS/NZS 2980 certification. Boilermakers and pressure vessel welders require endorsement under SafeWork NSW requirements.
Queensland
In Queensland, welding and fabrication is not a specifically QBCC-licensed trade for general work. Structural welding must comply with AS/NZS 2980. Pressure vessel work requires certification under the Pressure Vessel Code.
Western Australia
In WA, general welding and fabrication is not a specifically licensed trade. Structural welding requires AS/NZS 2980 certification. Pressure vessel work is regulated by Building and Energy under the Pressure Vessels Act 1951.
South Australia
In SA, welding is not a specifically licensed trade for general fabrication. Structural and pressure vessel welding requires appropriate certification under SafeWork SA requirements.
Tasmania
In Tasmania, general welding and fabrication does not require a specific licence. Structural welding must comply with AS/NZS 2980. Pressure vessel work must comply with WorkSafe Tasmania requirements.
Australian Capital Territory
In the ACT, welding and fabrication does not require a specific trade licence for general work. Structural welding must comply with AS/NZS 2980 under WorkSafe ACT requirements.
Northern Territory
In the NT, general welding is unlicensed for non-structural work. Structural welding requires AS/NZS 2980 certification. NT WorkSafe requirements apply to all welding operations.
Related Welding & Fabrication Services
Also looking for other welding & fabrication services in Australia?
welding repairs: Frequently Asked Questions
How much does mobile welding cost in Australia?
Mobile welders charge $80–$150/hr plus materials and call-out fees ($100–$200 for metropolitan areas). Simple repairs (cracked trailer chassis, gate repair) cost $200–$600. Custom fabrication (handrails, gates, steel structures) is quoted by the project and can range from $500 to $10,000+. Structural welding attracts higher rates due to certification requirements.
What welding processes are used for steel fabrication in Australia?
MIG welding (GMAW) is the most common for general steel fabrication — fast and suitable for a wide range of thicknesses. TIG welding (GTAW) produces the highest-quality, cleanest welds — used for stainless steel, aluminium, and precision work. MMA (stick welding) is used for site work and heavy structural steel. Plasma cutting and laser cutting are used in production fabrication.
Do welders need to be certified in Australia?
Structural welding (for buildings, bridges, pressure vessels) requires certified welders to AS/NZS 2980. Boilermakers and welders working on pressure equipment must hold relevant Australian Pressure Vessel certifications. General fabrication welding doesn't require formal certification, but Trade Certificate III in Engineering (Fabrication) is the standard qualification.
What is powder coating and how does it differ from paint?
Powder coating is an electrostatic process where dry powder is applied to metal and cured in an oven at 180–200°C, creating a hard, seamless finish. It's more durable, thicker, and more uniform than conventional liquid paint — resistant to chipping, scratching, and UV fading. Powder coating costs $100–$400 for a standard gate, including sandblasting preparation.
How do I prevent steel fabrications from rusting in Australia?
Preparation is critical: sandblast or wire brush all scale and rust, apply a zinc-rich primer immediately after cleaning, then apply a quality topcoat (epoxy or polyurethane for harsh environments). Coastal properties within 1km of the ocean should use marine-grade stainless steel or hot-dip galvanizing instead of paint for longevity. Powder coating over properly primed steel offers good protection.
What materials can be welded?
Common weldable materials: mild steel (most common), stainless steel (kitchen/food grade, architectural), aluminium (boat, automotive, marine), cast iron (requires preheat and special rods), chrome-moly (high-strength structural). Copper, titanium, and exotic alloys require specialist welders. Materials like galvanised steel require special precautions — galvanising fumes are toxic.
Find a Welding & Fabrication Near You
TradeRefer lists verified, ABN-checked welding & fabrication across Australia, ranked by real community referrals — not paid placement.
Browse Your Area